lock button below the collect and others you have to have two wrenches. Where your acc. goes should be a nut where it enters the tool you loosen to change acc. Push lock button or use a wrench to hold
...button the switch slides over. This will lock the shaft-then use small wrench provided w/ tool to turn the collet nut on the holder below where the bit goes in is there a little button ?? if so push ...
button of the shaft lock the shaft lock just spins along with the collet nut so I can't get the nut loose. Trying to fix a similar issue. The pin that gets pushed in by the button (and returned by the
Question about Dremel Tools & Hardware - Others
...lock button pops up; even when pressed Sorry, but I seem to have ( essentially ) the same problem... no positive lock. holding the button down while rotating the shaft to find the "best hold" then ...
Cant get the collet loose. The lock button pos up the moment i increase tension. try holding the buttion down with a pair of channel locks till lose
the spring popped out for the shaft lock. Where does the spring attach to? It doesn't attach anywhere, that's why it popped out. It should just fit in a recess, pushing the lock button outward
Question about Dremel Tools & Hardware - Others
...lock button is located. Remove the old pieces and replace with the new ones and reassemble the tool. Otherwise you can send the tool to Dremel to be fixed. Had the same problem---the lock is ruined ...
197 questions posted
Usually answered in minutes!
35 Questions
27 Questions
32 Questions
23 Questions