Dremel Variable - Speed Multipro Rotary Tool 395 "holds bit" Questions

I don't know how to change the bit on my dremel multipro rotary tool . . .I keep turning the gizmo but don't see anything getting smaller or lager. Push the pin on the side next to the tip and hold it

how do i insert a bit? I've done it before, but so long ago I forgot and can't find the instruction booklet. press and hold the small silver button near the front/end of the tool. This keeps the chuck

...Durabuilt rotary tool (120V, 085-06-0614) I bought at a pawn shop and it didn't come with the piece that holds the bit in. Thank you for your help At Home depot you can find it or online at

I have a Dewalt dw600 and the drill bit broke off, just the main cutting bit, and I cannot remove the bit- I try to unlock but it won't come off. DW660 is suppose to be a tool free bit insertion and ...

Grease is leaking out. it might be a cracked Grease is leaking out at the front of the drill. It might be a cracked collar. How do you remove the end of it to replace it? Pry the rubber tip off the ...

can't unscrew collet Trouble with Dremel 400 XPR Can't unscrew collet - even with wrench. While depressing the blue button (as instructed to do whether tightening or loosening), the threads seem to ...

...holds the bit. Next, you put the 'nut' on the shaft, but don't tighten it yet. Put the bit into the hole in the nut as far as it willl go, then back it out about 1/8 inch. Now you can tighten the nut ...

I cant loosen the bit on my dremel variable 395. The hole that the 'stop rotary pin' enters which stops the shaft from spinning is stripped out. The pin will not stay in place when I attempt to ...

I inherited a Dremel Pro from my son who passed away... I can't figure out how to change the drill bits....Help!!! Jerri you should have a little wrench that came with it and on the neck of the dremel

I have a Durabuilt rotary tool model S1J-FE2-10 that I can't seem to get to hold a bit. The directions say to hold the spindle lock button down and put the bit into the collet and tighten. I doesn't ...