Karcher 2500 PSI Pressure Washer "seals pump gun" Questions

Ad

...seals in pump head or worn checkvalves and possible worn nozzle many units are damaged when they leave the trigger gun closed for longer than 4 minutes it causes pump to heat up because the water is ...

Ad

Question about Campbell Hausfeld Garden

2 Answers

why does it leak form the gun Because the seals are shot and need to be replaced. the valve is leaking replacement is a must to prevent pump damage trigger gun needs to completely trap the pressure

Ad

...pump valves or seals. If you do replace/fix the unloader valve you set it to the correct tightness by depressing the pressure gun and turning the nut until the bypass water stops. Continuing to ...

pump. The pressure usually decreases from a faulty "Spill Valve". When the gun is closed the spill valve compresses and lets water circulate. When the gun is opened, the spill valve extends and closes

...could be the pump leaking or the hose, gun or wand leaking. Is there water coming out of these anywhere it is not meant to? It could also be a valve is not closing properly or a seal needs

Question about Karcher Garden

1 Answer

the pump housing. You can try taking the gun hose off and blow compressed air where the hose hooks on to blow waterwater out of the pump and dry the bottom. Then put some apoxy on the crack to seal it

...start up. Is the unloader clogged or faulty? Rebuilding the pump is not easy. Did you use the right seal drivers? Lube the seals when you installed them? Use a torque wrench? But a valve in

Question about Karcher Garden

1 Answer

...valve and you will need to purchase an unloader valve repair kit. If not you will more than likely have to replace the valves and seals in the pump. Sincerely, Aron Kerr Landa Northwest ...

Question about Northstar Garden

2 Answers

...seals if you take too long to turn on the water. It is a little more difficult to start the washer with water supply on and someone holding the trigger to wand open. This will prevents pressure from ...

like your pump is not working properly and the motor is just following the pump. First thing to do is check for leaks in the pump, wand hose, gun etc. It may also be a blown water seal inside the pump

Not finding what you are looking for?
Karcher 2500 PSI Pressure Washer Logo

805 questions posted

Ask a Question

Usually answered in minutes!

Top Karcher Garden Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Karcher Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...