Karcher 2500 PSI Pressure Washer "purging" Questions

Ad

Question about Honda Garden

1 Answer

what does code P145C represnt Says Manufacturer specific DTC Chinaedu: Code P145C means Evaporative Emission (EVAP) System Purge Flow Malfunction. RepairPal.com says: The evaporative control (EVAP) ...

Ad

Power Washer has no pressure, any ideas 1. If you have an inlet chemical injection valve make sure that the hose is intact and that the valve is closed. 2. Purge all air from the line by holding the ...

Ad

Coleman Powermate pressure washer PW0872400.01 no information on oil level for the pump. the manual states 30 weight non detergent oil but not how much. there is no site gauge and no dipstick. Also ...

Question about Karcher Garden

1 Answer

if a washer not used for a few years would that cause any problems Hi and welcome to FixYa, I am Kelly The seals do have a tendancy to harden / dry out or... corrosion prevents the unloader bypass ...

troy built pressure washer won't build pressure won't build pressure If the pump shaft is properly connected to the engine then you will probably need to rebuild the pump. Be sure air is purged from ...

Excell 2500 will not start. It cranks up but stalls every time choke is pushed in. Any suggestions? Has oil , gas, and water line was purged of air. Hi there It looks like that you have a carb problem

Question about Briggs & Stratton Garden

1 Answer

2-yr old troy-bilt pressure washer with honda gcv160 engine. seems to run well, but when trigger is pulled get full pressure for less than 5 seconds before reducing to house water pressure. when left ...

Question about Briggs & Stratton Garden

1 Answer

I have a Clean Shot 2050 PSI washer. I can get it to start, but I have very little prerssure. A household shower has more pressure. The garden hose nozzle has more pressure. Any thoughts???? LOOK , ...

Question about Karcher Garden

1 Answer

My 3.99 Karcher pressure cleaner seems to keep going on,off,on,off when i release the trigger.It used to keep going momentarly when the trigger was released until the pressure built up,then cut off ...

I need to purge the air out of the pump on my pressure washer Usually this is not a problem. Simply taking the spray nozzle out of the gun, turning on the feed from the garden hose and squeezing the ...

Not finding what you are looking for?
Karcher 2500 PSI Pressure Washer Logo

805 questions posted

Ask a Question

Usually answered in minutes!

Top Karcher Garden Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Karcher Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...