Maytag 20 cu. ft. Upright Freezer MQU2056B "gets cold thaws" Questions

...cold air the liquid gets back to the compressor. It can cause a bit of gunk to be picked up out of the oil and carried to the expansion line and plug up the line. Maybe turning it off will let the ...

...gets super cold and the other end is not cold enough. Frosts starts collecting on the super cold end and accumulates across the evaporator coil to the other end eventually blocking all air flow. With ...

Freezer not getting cold enough to freeze. I have a Frigidaire Commercial Freezer Model Lffu1765dw3 It is not getting cold enough to freeze and is starting to thaw out leaving water on the floor. The ...

freezer was making a noise decided to switch it to another wall socket not making noise anymore but not getting cold after about 5 hours of plugging it back on not even a a film on walls of freezer ...

gets warmer. This is an ongoing problem where once defrosted it solves the problem, trouble is I now have to do this every 6-8 weeks. I remove the back panel in the freezer, use a hair dryer to remove

...it will test bad/open,when the evaporator coil gets iced up you cannot blow cold air through a solid block of ice,(NO air flow)means no cold air throughout the unit even with the evaporator fan ...

Freezer not getting cold to freeze The fan is running and the light is on but the food is starting to thaw out. What is my problem? ok if this fridge uses a defrost timer, it's probably stuck on ...

food thawing in freezer it's a kenmore 14 upright frostless freezer model # 253.9244410 the light works, the fan runs, the compressor kicks in. neither line from the compressor is cold. needs a charge

...gets down to 0 to 5 above zero. If it is not getting that cold, something is wrong. If you had frost building up behind the rear panel, there is a defrost problem. Please let me know the temperature ...

Is my defrost timer broken or my thermostat? The freezer was holding -30 temp but now is at +30. The freezer was recently moved to a new location, waited 24 hours, turned it on, achieved -30. Ran fine