Brother HL-2070N Printer "start button" Questions

...panel button. Misfeed: Put the paper back in properly, and then press the control panel button. The printer will start printing again.You have explanations HEREBR you might try

button. No paper: Put paper in the printer. Then press the control panel button. Misfeed: Put the paper back in properly, and then press the control panel button. The printer will start printing again

...Yellow Status LED lights. When the status LED lights, release the Go button. When all the LED's light, the printer will start warming up. The print server has now been reset to its factory

How long will the drum last on a Brother HL 5140 when the yellow drum light starts flashing I have reused the drum for three life cycles and the print quality is still good. Just reset the counter ...

...search then press enter. Look for PRINT SPOOLER from the list then double click it. Press stop button and wait for 5 secs. Press the start button to reactivate the service. Thank you for using

...it on. When I unhook it from the comuter, and press the GO button 5 times quickly the Ready light starts flashing and thats all that happens. Normally press the go button all lights will go on one ...

...button) 8. The Error light will start blinking (Don't be alarmed. This is expected.) 9. Close door and wait. The printer will cycle through and make the sound it makes when you initially cut it on. ...

...the Blue Go button and keep it pressed. Wait as follows befor releasing the button: Each light (starting with the Toner light) will in turn switch to orange and stay on. When all 4 lights are ...

...Try holding downready/online button while you turn printer on. hold down button until busy light starts flashing....once warmed up the test print should print good ...

...Start button and select Printers and Faxes. For Windows® 2000: Click the Start button and select Settings and then Printers. b Right click on the printer driver you wish to configure, and then select ...