...and found a broken lever on the mode microswitch. Finally located a new switch, replaced it and reassembled. It worked for one switch operation, then the same problem. I took the camera apart ...
...and found a broken lever on the mode microswitch. Finally located a new switch, replaced it and reassembled. It worked for one switch operation, then the same problem. I took the camera apart ...
...Don't try to repair it at home. There are timed mechanical gears inside and can be impossible to reassemble without a
replace cracked lcd in canon powershot A520 I am seeking instructions for replacing a cracked lcd in my camera, and save myself the $150 that canon wants to do this job. I have successfully, ...
reassembly of the lens of my canon sd300 Hi, I am looking for a picture or a detailed explanation how to put back as one the 3 parts of the lens of my Canon sd300. If you have such kind of information
Cannon powershot s1 IS flash problem My camera made a firecracker pop when the flash was used and now the flash doesn't work anymore. I read that alot of people had the same problem and that it stems ...
Question about Canon PowerShot Cameras
...lens on a hard surface. This sometimes reseats the lens. If this does not work take to bits and
Canon Powershot SD450 got wet, would not work for a month, works great now but won't turn off. turns on by itself when you put the battery in. hi - just managed to get mine working again after ...
Zeiss Dialyt 10x40BGAT Binoculars - focusing wheel is loose and the 4 grub screws holding it on are tight. Any advice welcome regarding removal of screws and reassembly - is it easy and will it ...
the 2 pieces that cover the lense came off, This blog post outlines repair procedures for stuck automatic lens covers, and gives several examples on disassembly and reassembly. However, if you find ...
609 questions posted
Usually answered in minutes!
944 Questions
808 Questions
687 Questions
597 Questions
590 Questions