Canon PIXMA MP530 All-In-One InkJet Printer "added paper need" Questions

...paper tray as shown in fig. 2 slots. Front tray is below where the printed document would come out. you need to set the "Feed Switch" to the correct setting. Kinda obvious once you look at it for a ...

...paper i have tried cleaning bottom plate and it does clear up some, but comes back after a few more print jobs. It means that the ink is coming back up from the ink absorbers, you need to have the ...

...paper pulp stock added to the 70% recycled paper pulp... it is not the best choice for printing paper stock.  Choose your paper based paper upon what you intend to use it for.  Please read ...

...added a border, and then some random stuff in the corners to "fool" the printer into thinking the image filled the space, but it still only prints the leading half of the image and then spits the ...

paper jam or it could be associated with your LAN connection if you're runing Ad-Ware or a registry porblem. Try disconnecting your LAN cable (if you're using one) and try staring your printer

...added the paper and then pushed the OK button and didn't do anything and it was just stuck. I then tried to power down the printer and turn it back on, but the printer wouldn't turn off and I ...

...paper. how do I turn this off? you will have to change this setting in printing software settings , also make sure when you print something that it says current page only or page numbers selection is ...

...added my post today with the same problem, and thought I'd share what I since learned. Apparently this "Alarm light/U150" is common with several Canon models. The U150 indicates a faulty electronic ...

...paper output tray is closed even though it isn't. It will print anyway, but only if I continuously hold the tray down with my fingers. This may be a simple problem but it is quite annoying. Please ...

...added more paper to it. I did this and continued to try to print, unsuccessfully. I turns out that the back of the printer (part that brings the paper around) was open. So I closed it and tried to ...