Sanyo DP42746 42 in. Plasma Television "tv sound fuse blew" Questions

...sound like a fuse blew out now TV will not show picture Sounds like your lamp blew out. Check to see if you have any led lights on the tv that show "lamp". Lamps are easy to change out and you can ...

sound and blew the fuse in the plug has anyone got any ideas? I tried putting a new fuse in the plug but that blew as well Got a dead short if it takes the fuse instantly when plugged in and or turned

tv.power from the mains but no sound or picture.is there a fuse in the tv. My 52" sanya lcd tv blew a fuse - take the back off and follow the power cord up and you should have 2 fuses there - probably

...tv. If the fuse is good the power supply board will have to be checked or replaced..Next time consider buying a surge protector that starts clamping at a lower voltage. Panamax brands usually start ...

...in the air just after TV went out. sounds like a blown internal fuse. unless you are savvy with a soldering iron you'll need to take it to a TV repair man. i assume its out of its warranty

...sound is still working. My TV is a Zenith Z50PX2D Im hoping you had a spike and blew a fuse. If you feel comfortable checking for a fuse problem check that other wise you might have blown a voltage ...

...sound and then shut off. I can't turn it back on. The power cord is still "live". My first thought was a fuse blew. Is this something that can be relatively inexpensive to fix (less than 1/2 the cost ...

...sound and NO picture.Take the TV apart locate the power supply board on left.Remove the plugs for the lights etc.take out the screws carefully unclip the power supply.Turn it over find the F1 tiny ...

...sound like a fuse blowing and screen went black. Have unplugged but no changes. Is there a fuse that can be changed for screen or Unplugged and plugged back in. Tried reset button on remote but can ...

...TV picture went out and only had sound. I replace the power supply board and all was well. Well the same thing happen again but this time one of the fuses on the board has blown. I replaced the fuse ...