Question about Kodak EasyShare Office Equipment & Supplies
...ft (approximately 30 m) of the printer. On The WiFi Status Indicator could be on, but you could be connected to the wrong router if you used the manufacturer's default SSID and password when you set ...
Question about Office Equipment & Supplies
...usb 6 ft, for hp photomart 4200 series,I bought a usb 6 ft, for my new printer scanner copy all in one , but it keeps coming up , that the usb is not connected, I have unplugged with all through the ...
...ft or here 3ft USB 2.0 Printer/Device Cable A Male to B Male If you additionally need to get morte USB plugs you can use an USB hub: Micro Innovations Hub Do not forget to rete the solution ...
......
Question about Kodak EasyShare Office Equipment & Supplies
...is too thin, or too long, or both. USB signal loses strength beyong 6ft. Use a good quality, thick USB cable and if tha unit is over 10 ft. from the computer, use a USB active repeater. Be
...cable vs a usb cable? Deifinetly. Scanning only works through the USB cable. Make sure you buy a good quality one. And do not exceed 10 ft length without using a USB active repeater extension
...ft, you need either a good quality USB cable (try the Belkin brand found at OfficeMax), or connect using a parallel cable. I am using about 20ft of USB cable with no problems here, but I use the ...
USB Type A Male / Type B Male Cable, 2.0 Version, 1 ft Power cable must be standard two prongs on printer side, and depends on your socket on other side. You can find both cables at any local computer
......
ft how long u need it one side looks like flat usb goes in computer other is square any store just ask for printer usb cable k You need a cable like this one : USB Type A Male / Type B Male Cable, 2.0
1,223 questions posted
Usually answered in minutes!
996 Questions
812 Questions
74 Questions
69 Questions
51 Questions