Philips 50MF231D 50 in. Plasma Television "fix relay button" Questions

...relay click happens and I get 10 blinking red lights next to the power button. Hoping the problem will fix itself ;) Most likely a bad Y-DRIVE or Y-BUFFER board, 10 blinks is one of those two and not ...

...relay can kick on then the TV wont power on, or will only stay on for a short amount of time. There are many components in the start up process that could do bad. Ok, now for the fix, For this you ...

button is pressed, the relay inside will click but with no other response from the TV. This tells me that either the relay contacts are no good or that there are some serious soldering problems on the

fix a black screen on my Sharp AQUOS LCD TV 40 My LCD TV will not show any image when I press power button. I have red standby diode and when i click power button I can hear relay click and diode goes

...fix, but it got my tv on. I removed the back and tried the power switch. I located the relay that was clicking. I have two blue relays in the middle of my power board. I placed a hair dryer over the ...

...relay click, the power button then turned green followed by another click. At this point the power light started flashing red and of course no picture ever came up, I called sharp they were hopeless ...

...fix. just one idea.. some set you may program to stay on in case you use cable box and when you turn on the box tv turn on same time but may be defective tv there is relay,transistor and the micro ...

...BUTTON AND HEAR THE MICRO RELAY ON THE POWER SUPPLY BOARD GO ON UNIT ACTS LIKE IT WILL TURN ON THEN AGAIN WITH THE BLINKING OPC AND POWER LIGHT. REMOVED BACK COVER AND CHECKED ALL BOARDS AND ...

relay click after plugging in, and the red power led comes on, but when you push the power button it does nothing. Any ideas? I'm having the same problem. Can anyone help. If possible i'd like

...fix it Thanks for the video. There is not much that be done, other than taking it in for repair. Are you comfortable with removing the back casing and replacing parts? Just curious. If you've tried ...