Question about HP LaserJet Office Equipment & Supplies
...AUTOMATICALLY EJECT PAPER HP 4345, with error code 13.20 Check inside the MFP (manual feed tray) for a scrap or a whole sheet of paper.There is one of three sensors that is sending a paper jam notice ...
Question about HP LaserJet Office Equipment & Supplies
...NOT AUTOMATICALLY EJECT PAPER my experience says jamming in duplex area using card stock. this may occur if default is duplexing. set default to single side and / or try same job using plain a4 ...
...eject the jammed pages automatically. These pages will often be blank. Check the display for "Performing PRINT/STOP TEST" or "Performing SERVICE TEST." Either of these messages indicates that the ...
Question about HP LaserJet Office Equipment & Supplies
paper is being fed at error occurrence, the error is indicated after the paper is ejected. - If the error occurs, the print head alignment values are not changed. - After exit from the error by the OK
...The paper may automatically be ejected from the printer. Gently pull any remaining jammed paper straight out. Open the front cover. Pull the toner cartridge out. Pull out any internal paper
...paper is being fed at error occurrence, the error is indicated after the paper is ejected. - If the error occurs, the print head alignment values are not changed. - After exit from the error by the ...
...paper is being fed at error occurrence, the error is indicated after the paper is ejected. - If the error occurs, the print head alignment values are not changed. - After exit from the error by the ...
Question about Office Equipment & Supplies
...or cassette. 9. Reconnect the power cord, turn on the printer and confirm that the Alarm light is off. (If there was any jammed paper remaining in the printer, the paper may be automatically
...paper will be ejected automatically. b) Reload the paper into the machine and press [OK]. * If you have turned OFF the machine in step a), you will need to retry printing, because this operation ...
Question about HP LaserJet Office Equipment & Supplies
error of "paper mismatch" "paper size or type is incorrect. Press Ok to cancel job" When you press OK eventually it ejects the page usually too mangled to put into the printer again. Even when it does
205 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions