Xerox Phaser 8560MFP Laser Printer "configuration card" Questions

...configuration card is missing. If you are not sure what it is, the configuration card is the 'SIM' like card that slots into the side of the printer where the power cable connects. If the card is ...

...configuration card is for the wrong product. 1. Turn off the printer 2. Verify that the Configuration card is the correct type for the printer (located at the rear of the printer.) 3. Insert or ...

card, or the switch/router/configuration. Easiest thing to try is plugging the network cable directly into a laptop. Does it get an ip address? If the printer has a static ip address, try setting that

XEROX CODE 02-540 02 errors usually refer to configuration card issues. I couldn't find anything on the 540 can you verify that's the complete error code.

how to fix invalid configuration card you must replace it. there is no repair

...see the following. 3. Power cord connection 4. Power switch 5. Parallel port connection (8400 series only) 6. USB connection 7. Configuration card 8. Ethernet 10/100 Base-T connection. Hope this ...

...card stock, etc) as well as changing the image quality. I'm getting voids, or deletions, in the printing as well as faded looking colors. The black however, prints fine.I was told to try to increase ...

configuration pages. It must have a "D" in the name for you to be able to do automatic duplexing. i.e. 8400DN or 8400DX . Then you can scroll to printer setup and select defaults, and then turn on the

...Configuration Card, etc.). If the print fails, refer to Section 4 for print engine troubleshooting help. 1. Press the Test Print button located on the Rear Panel. 2. The printer prints the 600 x 600 ...