Canon PIXMA MP460 All-In-One InkJet Printer "1 pc" Questions

...1) Turn off the printer. 2) Shutdown the PC to which the printer is connected. 3) Remove the USB/Serial cable through which the printer is connected to the PC and reconnect it back and replace the ...

...1.disconect your printer from your pc 2.uninstal printers driver from your pc 3.instert printers cd 4.run setup 5.only connect your printer to pc when setup ask you to do If i help you pls vote ...

...1) Turn off the printer. 2) Shutdown the PC to which the printer is connected. 3) Remove the USB/Serial cable through which the printer is connected to the PC and reconnect it back. 4) Now switch ON ...

...scan from your PC. Go to your computer and use MP Navigator EX software and select the 1-click feature then "save to PC". it will autostart your scan for you and ask you to save it to your

...1.unplug your printerfrom your pc 2.uninstall canon driver from your pc 3.run setup (without connecting printer to pc) 4.connect your printer only when setup ask you to pls vote us to keep us ...

...PC with the correct drivers installed and a full set of ink carts:1 Press [ON/OFF] to turn ON the machine.2 Load the paper in the Auto Sheet Feeder. (See page 23)3 Create a document or open a file to ...

...1. download canon ip 2200 resetter 2. run it in your pc, run general tool ( while run it you need to plug in printer power cord by pressing resum botton) 3. select usb port and printer model 4. then ...

PC. 1. Scan the first parking stub then click on File - Save the image as a jpg file Eg. image1.jpg 2. Repeat the scan the next parking stub and save the image file Eg. image2.jpg 3. Repeat step 3 for

...1/16 of a page and then goes to the next page. The printing is incomplete. Hi there try to reset the printer & then try. I hope its give u success. After that if u not success then uninstall the ...

..... Bottom line is I get an error and nothing gets sent. Please help. 1. clear the fax queue 2. clear all documents in the pc print queue 3. unplug the fax machine for 30 seconds 4. replug and try ...