Question about HP OfficeJet Office Equipment & Supplies
plastic are the sensor flags which is why it will not feed, those are required to let the machine know that the paper is present in the feeder. No flag no feed. Look at the plastic thing try to figure
sensor is broken or dislodged. Open the top cover of the Auto Feeder and look for a small black piece of plastic that looks like it moves back and forth when paper hits it and see if there is anything
...plastic sensor that moves back when the paper is loaded in the ADF. the lever (plastic sensor) has a "flag" on it that interrupts an invisible light (infrared) beam in the optical sensor (optical ...
...plastic gate out with pliers, and it was tough thing to get out but after some effort it came out in pieces.Powered up the printer and it is working great. Not sure what issues are created by ...
...sensor which detects the presence of ink...if an inadequate amount of ink resides inside the cartridge then the printer will typically flag an alert "Cartridge Empty" or "Low Ink", etc. If "empty", ...
Question about Brother Office Equipment & Supplies
...plastic flag that tells the sensor the door is closed. If it's constantly telling you to close the ink cover inspect both the cover itself to verify that piece of plastic isn't broken and is ...
plastic "tab" (sensor flag) sticks up in the "U" to tell the machine that there is no paper in the path. When the paper was pulled out from the front of the machine, the "tab" (sensor flag) was either
...plastic sensor flag, it should move freely. If it is stuck remove the top cover above it and try to free it so it can move. Below is a picture of the printer with the output sensor flag circled. My ...
Question about Panasonic Office Equipment & Supplies
...sensor flag (plastic flag) sitting in the middle of a rubber roller. there r a mistake in the first sensore when the paper is release ... open the door of u6 make sure that the sensore in the ...
...of plastic hanging and is very loose it is the sensor for the paper, ( although I have seen it work without it !!!!!!) I have the sensor flag. And i got Drivers.... It is just instaled
899 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions