Question about HP OfficeJet Office Equipment & Supplies
...lights flash and reset power shows. I reset power and the same thing happens repeatedly. Have tried posted solution, but it doesn't fix you will want to go into the anual and look for a factory ...
...and 3 while plugging in the power cord to the HP All-in-One. Release the buttons after the HP All-in-One starts up. The HP All-in-One will now be reset to factory defaults. Thank you so much. ...
Question about HP OfficeJet Office Equipment & Supplies
...to reset the factory settings but did not seem to help. Not sure if I am resetting properly Unplug the printer for about fifteen minutes or so. It will do a hard reset and it will clear the NVRM
Question about HP OfficeJet Office Equipment & Supplies
Reset the All-in-One to the factory default settings by using these instructions: 1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds. 2. Then, press and hold
Reset the All-in-One to the factory default settings by using these instructions: 1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds. 2. Then, press and hold
Question about HP OfficeJet Office Equipment & Supplies
...several flashing lights on the panel also. First try to get a factory reset on this machine, it usually helps. If it is has a scanner on it then it is a possibility that the scanner bulb is
Question about HP OfficeJet Office Equipment & Supplies
...factory reset but to no avail. How did you do the factory reset? Take out all cartridges and heads then unplug for 30 minutes? Plug back in and reseat all removed items? If so you probably have a bad ...
Question about HP OfficeJet Office Equipment & Supplies
...print cartridge carrier, some can not, also reset printer to factory defaults un plu and then plug back in, in windows go to set up - tools - restore factory defaults ok see if that helps....good ...
factory reset. Click on the link below and scroll down the page to near the bottom, and you will find instructions to do a "partial reset" , which returns the printer to factory defaults. If you click
Question about HP OfficeJet Office Equipment & Supplies
...unsuccessfully. The "reset to factory settings" should have worked. What happened? What did not happen? Did you power-off the unit after the reset, including unplugging the unit from all AC
899 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions