...Number 5 or 6> Press Ok and cancell to come to the main menu Then in the All-In-One Go to menu / Setup> Press the right arrow key and locate Advance Fax Setup> Locate Distinctive ring pattern and set ...
Question about HP OfficeJet Office Equipment & Supplies
...5. Display should read "Full Null Reset" 6 Only install color cartridge. Close cover 7. Wait for machine to ask for black cartridge, then open cover and install black cartridge. 8. Close cover 9. ...
...5-digit number after a few seconds. 5. Press Cancel several times to completely exit out of service menu. 6. Attempt to send a print job to printer. NOTE:with a marginally performing ink cartridge, ...
number 6 on the keypad or scroll to Tools. 3. Press 3 on the keypad or scroll to Align Printer. The alignment process starts. 4. Perform IDS Priming . ================= Note: A semi-full reset will do
Question about HP OfficeJet Office Equipment & Supplies
5-digit number after a few seconds. 5. Attempt to send a print job to printer NOTE: with a marginally performing ink cartridge, this typically results in allowing 1 entire print job to be printed at a
Question about HP OfficeJet Office Equipment & Supplies
keys do you hold down??????????? So I decided to hit the Internet for an hour or so. It turned out to be about 8 hours, with not one place knowing how to reset a d135. In EVERY (I repeat) reply, forum
Question about HP OfficeJet Office Equipment & Supplies
...5 start clear Enter the number of rings desired then press start stop stop HP Office Jet / LX For a full ram clear, press and hold * and 1 while turning the power on. Hold the keys down for a few ...
Question about HP OfficeJet Office Equipment & Supplies
...Number of Copies , Paper Type , Color Start If the page still shows defects, go to the next step. Step 5: Replace the problem cartridge If the problem has not been solved by the steps above, either ...
...and hit Set 4. Arrow to number 4, Printer Re-Set and hit Set. 5. Yes, re-set printer (hit minus key - back arrow). 6. Unplug the machine and plug it back in. This just worked for me on a D860 ...
...and hit Set 4. Arrow to number 4, Printer Re-Set and hit Set. 5. Yes, re-set printer (hit minus key - back arrow). 6. Unplug the machine and plug it back in. This just worked for me on a D860 ...
514 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions