Samsun PN60E550 60" 3D 1080p Plasma TV - 16:9 - HDTV 1080p - 60 "television takes time switched" Questions

power light flashes and doesnot turn on been slowly taking longer to switch on and now can take hours to come on This might require the attention of a qualified service technician. How many time do ...

...takes very long and screen goes black Has it always done this since you purchased it? Check the response time online for that TV, it may just be that it is a model with poor response time when ...

...takes approximately 4 minutes to appear. Today there is neither sound nor picture. Feels like it could be the switch. I called WalMart. They do not repair televisions. We have no one around who is ...

...time and switches off again. I have slightly different problem. The TV "switched" off suddenly when I changed the channels too many times. Will need to turn off the main switch power off for a while ...

...television is slow to turn on you have to push the on /off switch about 50 times before the tv comes on can you help please ? my lexor tv takes about 80 times of switching on and off before it works ...

Have trouble turning tv on. It clicks but takes ten to twelve times for it to finally catch. I think the one switch is going. plug it directly into the wall. your power strip has a small voltage drop.

Philips switching off Hello, I have a Philips Flat tv 42" The problme is that I urn the TV on, it works for 20 min, and then it switches off. Then for some time I can't switch it on, when I do, after ...

It won't switch on! The stand by light just keeps flash in every few seconds, it had been taking a few seconds to come on the last 3 or 4 times iv switched it on and now it doesn't come on at all The ...

power is on in standby, but takes several times pushing the power button for the power or tv to actually come on Very bad for the TV, don't do this! Got the remote control? Switch on or off (full ...

turn on tv screen shows for a second and goes blank.there is sound three known fault possibilities: 1 inverters have no ac output too the CCFL lamps 2 power board has dc output shut down 3 timing ...