Bissell 3522 PowerForce Bagged Upright Vacuum "7 brush turning" Questions

Ad

Question about Bissell Vacuums

1 Answer

...TURNING AND MAKES A NOISE I JUST BOUGHT THIS YESTERDAY. THE BRUSHES WILL NOT TURN AND IT MAKES A CLATTER NOISE AND THE WHOLE FRONT JUMPS. WHEN I TRIED TO FIND BELTS I CAN ONLY FIND ONE. THIS IS A ...

Ad

Question about Bissell Vacuums

1 Answer

brush motor quit I was cleaning my carpets. Everything was fine. I turned off cleaner to move to a different area and when I turned on the switch that controls the brush, nothing happened. No sound or

Ad

Question about Bissell Vacuums

2 Answers

...7. Alternate holding each brush arm in place while replacing the red retainers. 8. Replace the Phillips head screws and turn until snug. 9. Turn the machine right side up to replace the Tank-in-Tank ...

...7 upright (radiance). roller brush won't turn and red roller brush indicator is on. roller will turn easily by hand and belt is in place. how do i fix this? As you already know, the red brush ...

...end cap into base. 6) Rotate brush roll 2 turns to center belt. 7) Replace brush roll cover 8) Replace 2 screws And you can get the maual here. http://www.eureka.com/service/manuals/80244.pdf Good ...

turning and since it is about 7 years old and out of warrenty I decided I had nothing to lose so I took it apart after reading all the other posts on this problem. The brushes are actually turned by a

Question about Dyson Vacuums

2 Answers

...or the belts broken More than likely you need a new belt / clutch assembly. As follows: Dyson DC-07 Clutch Assembly for Early Models - Free Shipping This clutch / belt assembly also fits the Dyson ...

Question about Vacuums

1 Answer

brush assy & remove the shaft & brgs that go through it 7 clean out the hair,fuss ect,so it will turn You need to take your vacuum apart once a year or more to clean things so they continue to

Question about Bissell Vacuums

1 Answer

...brush has stop turning. I unclogged all the hair off and around it but it still doesn't turn. When looking at the bissel, only the left side of the brush will come down. The right side only comes ...

Question about Bissell Vacuums

1 Answer

...turning brushes will not turn on hoover steam cleaner Check the shaft on top of the brush block to make sure it hasn't broken, if brush block is ok, then most likely the turbine is bad and will have ...

Not finding what you are looking for?
Bissell 3522 PowerForce Bagged Upright Vacuum Logo

87 questions posted

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...