Question about Lanier Office Equipment & Supplies
...Turn the belt tightening knob (top middle with arrow on it). Pull out the OPC Drum. Install new OPC Drum. Turn the belt tightening knob back. Re-install a waste toner bottle. Close the front
open the door from the back of the printer (turn the knobs) and the paper can be removed from the back. After removing paper jam, replace the door. It is a long door as wide and the printer, but about
Question about Canon Office Equipment & Supplies
the side door to reach the fusing unit see is there have jamming paper over there ,the paper under the fusing unit just open front door turn the knob clockwise on the fusing unit paper will coming out
Question about Lanier Office Equipment & Supplies
...6112 "used toner" on the display? Open the front door, lift the clam shell open and carefully replace or empty the white used toner container. Replace and turn the blue knob clockwise a few
the machine. If your paper didn't make it to the fuser, you should be able to pluck it out. If it did, open the front door, and turn the knob on the fuser backwards until the paper comes out of it
...THE COPIER OFF OPEN THE FRONT DOOR SEE IF YOU CAN TURN THE BLUEGREEN ROUND KNOB ON THE TOP DRAWER (DRAWER 1). CHECK THE CLEANING WEB, MOST TIMES IT HAS WRAPPED ITS SELF AROUND THE UPPER FIXING
knob anti-clockwise to lock it into place. Hope this helps. BurntLime mostly HP printers have a panel door which you can open when a paper jam happen...it is usually located at the back of the printer
...door release knob Product with in-tray catches Product with a duplexer Wipe each paper roller with a lint-free cloth lightly moistened with distilled or bottled water. Rotate the rollers upward ...
knob on the rear access door of the printer counter-clockwise, and remove the door. 2. Insert the module into the back of the printer. 3. If the lights remain on, remove the 2-Sided Printing Module by
Question about Lanier Office Equipment & Supplies
...sir;You have to remove fuser unit out of the machine then you can find out what going on. open back door unscrew two screws release two blue knob unplug both sides connecter you can easy pull
1 questions posted
Usually answered in minutes!
3 Questions
1 Questions
1 Questions
