Sony BRAVIA KDL-32S2000 32 in. LCD HDTV "attachment parts tv" Questions

Lost the screws that attached to the TV stand for KDL-40S4100. What type are they and where can I get replacement? Required screw part number is as follows as per service manual of Sony KDL-40S4100 ...

52" Sony Bravia TV has a thin Blue line down left 52" Sony Bravia TV has a thin Blue line down left side of TV A line on an LCD screen can be cause by the screen itself going bad or the T-con ...

cant get the table stand off the bottom of my tv! manage to get the plate off but there is still a part sticking out of the bottom of the tv...i'm trying to wall mount it. There's four screws that ...

...parts depots here on the web. I just suffered from a similar problem, on the same tv and it solved my problem perfectly (Stupid 13 blink, blink code...) The searchable part number is SSB400WA20. Its ...

No sound when my computer is connected to my Sony Bravia TV My computer has a DVI output for video and I have a DVI to HDMI cable attached. Vidoe works great but I have no audio from my computer. The ...

tv? as to cleaning on the back with the air louvers take a canister vacum with the brush attachment and make sure set is off and run the brush over the louvers to extract the dust as to cabinet a damp

...Parts has them available: 800-488-7669 The stand is $107.59, and requires four screws to attach to the TV. They're $2.25. (quite the bargain!) The model number of the stand is X21033652. Please rate ...

Exactly the same problem and we bought ours in Jan 08 When first turned on, the image is blurry/flickering on one side only. After 5-20 minutes (sometimes faster, sometimes not), the picture is ...

...TV will not turn on Check its main power regulator section circuit.  Replace the power regulator board if necessary.  Visit the site named ‘Electro-help’ for more details.  Check this ...

...basically being attaching all my KDL46W4100 parts onto the 46V4100 panel. The tv from what I can tell is exactly the same. Thanks for the help. yes this should work if the screen connectors match