...hinge, or both of them, isn't very tough. http://www.insidemylaptop.com/replace-br... and these WEB sites for parts :- LAPTOP PARTSwww.laptoprepairco.com/ www.laptopparts.com.au/ www.laptopking.com/ ...
...laptop after his hinge broke. I'm not working and couldn't to buy a computer for myself. It works perfectly fine outside of the missing hinge which causes the screen to slowly fall ...
laptop, the Video Cable could have been pulled on. The video cable routes under the Left Hinge.The video cable could also be pulled loose, on the back of the LCD screen. Again, do NOT assume. You will
laptop, the Display Panel Cable may become pinched in the left Hinge. This can cause;A) The connection at the motherboard to come looseB) The connection at the back of the Display Panel to come looseC
Question about Dell Inspiron Computers & Internet
...laptop, the cable is slightly pinched in the Hinge, and it pulls loose from the motherboard connection, AND/OR the LCD screen connection.Doesn't take much of a loose connection. In fact it's ...
Question about Dell Inspiron Computers & Internet
...laptop screen. If the fault is in the speakers then it is probably the connection to the speaker. . If the short is in there, you'll have to take the screen apart and carefully look for a short ...
...Hinge, and the opposite end connects to the back of the LCD screen, in the Display Assembly.1) A connection may be loose. One end of the video cable may be loose, to it's connector. BOTH the ...
Question about Dell Inspiron Computers & Internet
hinge and plugs into the systemboard and will usually have a ground wire screwed into the system as well. Most likely this cable was dislodged when the unit fell. Unplug the cable and reseat it making
Question about Dell Inspiron Computers & Internet
Hinge. From there it goes up into the Display Assembly, and connects to the back of the LCD screen. A cable branches off from the main cable, and connects to the Webcam Module. http://www.ebay.com/itm
...laptop hinges are too tight, already put some penetrating oil in it still to no avail. I disassembled it already and even if used pliers to turn/twist it, its still too tight. pls help help dont turn ...
1,539 questions posted
Usually answered in minutes!
1,822 Questions
1,740 Questions
1,351 Questions
971 Questions
867 Questions