...duo therm comfort control thermostat, isit possible or would second thermostat be simpler I replaced one unite with another and the wires are differance colors the old unites wires are ...
...white wire on the"w" terminal. i then hooked the 4 wire bundle as follows;red to"rc" terminal,white to"y"terminal,green to"g"terminal,blue to"a"terminal. tested unit-nothing happened.i went back to ...
wire to the r section of the thermostat white (heat) to the w marked on thermostat Green (fan) to the g marked on thermostat yellow (a/c compressor) to the y marked on thermostat. Blue to the c marked
...duo therm thermostat 3106995065 with 3313189049, need wiring connections from old to new. Red is power Green is fan Yellow is compressor White is heat Common...................not sure on that ...
...WHITE RODGERS 300 HEATING AND COOLING THE NEW ONE WE HAVE Y,W,B,RH,O,RC,G,A. TERMINALS OLD ONE HS, 7.5,COOL,FUR,HI FAN,FAN, GND, FUR - OLD T'STAT - (W) NEW T'STAT COOL- OLD T'STAT - (Y) ...
...duo-therm comfort control T-stat, gas furnace below, and one roofftop A/C unit. Until recently, i couldn't get anything to come on, but when i went up top and opened the A/C lid and got into ...
...white stripe wires are the furnace control wires. The furnace turns on and off by the opening and closing of relay. Most likely, the furnace control relay is stuck in the on position. On the ...
...white wires) with a small piece of wire, if the compressor comes on and runs, then you have a bad freeze control. If not, then you have a bad control board. If you have manual controls on the ceiling ...
2,853 questions posted
Usually answered in minutes!
95 Questions
12 Questions