...mode lg model number lwhd1009r compressor shuts down air is cool but unit does not stay long enough to cool lower the thermostat down little lower if the compressor starts up then bad ...
...desired room temperature is. It will keep the compressor on until it reaches your desired setting and then turn the compressor off. THERMOSTAT WHEN SET DOWN ALWAYS GOES BACK TO 80 DEG DOES NOT ...
down button to select option 300 ( Manual/Autochangeover) , select 0 for manual, 1 for automatic. ( read caution in page 22 of installation manual ) Good luck The thermostat must be programmed (setup)
Question about Heating & Cooling
...thermostat? You may have set it on the cool cycle, which on some models only cools. Which means that once they draw down to the set temperature they slow down but do not stop cooling. Set it to auto ...
Question about Heating & Cooling
...down to the thermostat setting. Any ideas? Thanks Mike http://customer.honeywell.com/honeywell/ProductInfo.aspx/TH5110D1006 Click on the Link Above. At the bottom of the page is the Downloadable ...
cools down to the set temp. The coils are wet but not frosting. Is the AC set on an energy saving mode. Together with this program if the thermostat is defective the same symtoms can appear. So please
Question about Heating & Cooling
...thermostat past 7, the unit shuts down. Any ideas? Low on Freon? Sounds like a leak to me - if you have a set of guages available (know anyone working in the refrigeration field???) you could tell ...
...down to the Thermostat setting. I have it set on COOL and AUTO. I have to shut the A/C off; then later turn it back on as it gets warmer again. Remove the thermostat and disconnect the r and y ...
Question about Intertherm Heating & Cooling
...down You shouldn't be messing around inside the thermostat. You have now changed the setting on the heat anticipator.This control is used to set the heat, so the heat shuts down before and in ...
we have a luxproPSP511lc thermostat we can't get the thermostat down its on 83 we are dying in hear. Are you using the Timer Settings and have you got the Temperature Mode Switch Set to Cool?
2,853 questions posted
Usually answered in minutes!
95 Questions
12 Questions