...So far this season two contactor have burned out. Can you solve our problem You need to have a amperage check performed, I believe you have high amperage due to insufficient water flow raising ...
what is the amperage draw on the Daewoo a/c model # DCW f0520rle? According to Daewoo, the amperage draw for that Model A/C unit is 4.6 amps Hope this helps you. Please let me know.
Question about Maytag Heating & Cooling
...to find their product. The number you gave would not work. I can tell you this, the voltage and amperage are located behind the filter on a data plate. The higher the voltage the lower the ...
Question about Dometic Heating & Cooling
...run that AC without causing problems. 114 volts will be o.k. Remember, when voltage goes down, your amperage draw goes up. That will trip the breaker, and eventually weaken it if it happens too often ...
Question about Goodman Heating & Cooling
What is the compressor amperage for Frigidaire Refrigerator? look at data plate on compressor it will have a fla rating & lra rating one is full load amperage one is locked rotor amperage.
Whenever i try and turn on unit the breaker pops? You need to check the maximum amperage the A/C units pulls and compar it to the breaker amperage. The breaker amperage needs to be greater than the ...
what is the amperage draw for a dometic roof a/c unit for the compressor amd if the compressor is wearing out. there are a large number of different A/C units so without knowing a brand/model it is ...
Question about Haier Heating & Cooling
cuts off then breaker kicks. the start capacitor is bad. Motors develop what is known as lock rotor amperage. requires alot of torque to turn the motor until it reaches iits rated or run load amperage
Question about Kenmore Heating & Cooling
...curcuit to run a/c. the best thing to do is have it on its own curcuit or on a curcuit where the amperage load is lighter. good-day !! this may have happened because when new, it did not draw to ...
Need start up amperage Use clamp on meter set to amps and place on one of the hot leads to unit. Start unit and record amperage spike.
2,853 questions posted
Usually answered in minutes!
95 Questions
12 Questions