Question about Washing Machines
...end of the drain hose is higher than the water level of the washer. Take the drain hose out of the stand pipe or sink and check where the hose needs to be to stay above the washer tub. You might
Question about Kenmore Washing Machines
what are all the F codes that can show up, what do they stand for I have had the sud come up on my washer but my friend said she has a" f" and some number show up on hers.?? I have never seen it ...
standing water after nonuse after not using for a few days the machine has standing water. This has been going on for about a 3 weeks. this morning the water smelled like poop. does not seem like ...
Question about Kenmore Washing Machines
...is leaking from the bottom during the spin cycle. you may not be leaking out the bottom. Your stand pipe may be clogged. If the stand pipe has a slight clog in it, the stand pipe will over
Kenmore 3.8 cu. ft. HE4t King Size Capacity I finally purchased the stands for my washer and dryer, what is the right way to install them? remove feet set on stand and put the 4 screws in 2 in the ...
Question about Whirlpool Washing Machines
The washer smells funny. Like mildew or something. No water standing. Seems to drain. Probably has some standing water in the pump hoses as well as the drain hoses If you do not use the machine often,
Another common cause for siphoning is not having an air break between the drain hose and the drain stand pipe. Usually, this isn?t a problem since the drain hose diameter is usually much smaller than
The wash keeps running water, never fills up Your drain hose is to far down in the stand pipe or your stand pipe is to low, your stand pipe should be roughly the same height as the top of your washer ...
Question about GE Washing Machines
GE WBXR1060TAWW, Top loading high capacity washer. I need the specs, capacity and number of speeds? The (X) in the model number stands for extra large (2.7cu ft) capacity. The 1 stands for single ...
Question about Frigidaire Washing Machines
What size drain stand pipe should be used? Water is backing up from the drain. Machine is working great but water over flowing at the stand pipe The problem is being caused because there is a blockage
1,203 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions