Kenmore 46462 Front Load Washer "pieces metal debris washing machine" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

...metal at 120degrees and 240degrees. After a spin one item in the washing comes out with oily spots (4 or 5) in a line separated by the distance between the holes in the drum. It looks like the piece ...

Ad

Question about Hotpoint Washing Machines

1 Answer

...that blocks the flow of water..try to check at the back panel.connecting the drain hose.there might be some pieces of metal that blocks the flow of the discharge water..Better check.Hope this

Ad

Question about Whirlpool Washing Machines

1 Answer

...disconnect the pieces without a special tool. The old style pump/impeller can be separated and is a metal serrated shaft into a plastic impeller hole that can strip out when debris jams the

Question about GE Washing Machines

1 Answer

...pieces of calcified looking debris in the washer. It had stopped spinning and smelled like rubber. Help, cant even find the model number (where ge said it would be) GE USUALLY PUTS THE NUMBERS UNDER ...

Question about Frigidaire Washing Machines

2 Answers

metal ring, I could easily pull the rubber accordian down 2 inches, stick my hand in it, and pull out debris. I pulled out debris for about 5 minutes, and was so excited because I knew my washer would

Question about Kenmore Washing Machines

1 Answer

...metal screw wirh 1/4" drive head located on the lower lop of the panel)...open pump strainer (looks like a large stove knob, Turn it counter clokwise, lookout! lots of water will gush out... back ...

Question about Kenmore Washing Machines

1 Answer

...metal screw wirh 1/4" drive head located on the lower lop of the panel)...open pump strainer (looks like a large stove knob, Turn it counter clockwise, lookout! lots of water will gush out... back ...

Question about Kenmore Washing Machines

2 Answers

...metal screens inside the openings on the water inlet valve. Make sure they are clear of rust or debris. (Especially the cold water side) Check the solenoids using a multimeter or ohmmeter and testing ...

Question about Washing Machines

1 Answer

...debris filter at the front of the machine and checked the drain pump propeller. The propeller came away in my fingers and I found a piece of metal, which I asume was supposed to be holding the ...

Question about Kenmore Washing Machines

1 Answer

...by filling the outet of the drain hose ( this may dislodge debris that may jam your pump), re-assemble, plug to power, and turn-on. In my case, there was a piece of a metal lodge in the pump

Not finding what you are looking for?
Kenmore 46462 Front Load Washer Logo

361 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...