Kenmore 2.1 cu. ft. Portable Top Load Washer "water valve problems sears side" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

...on the back slide the top backwards then lift the water valve is right there on the back wall call apliance parts pro 877-477-7278 order part number AP3128776 41.00 a few dollars cheaper than ...

Ad

Question about Kenmore Washing Machines

1 Answer

...water valve and see if the dispenser fills and flushes with cold water. If not then you need to begin troubleshooting at the dispenser valve. This valve can be seen on page 36 lower left side pic and ...

Ad

water fill valve or sensor. Please see the Whirlpool installation and maintenance guide on top load direct drive washers to get a better idea of where the problem may be. https://secured.whirlpool.com

Question about Kenmore Washing Machines

2 Answers

...water valve that will open but not close. I have a couple of additional questions to ask. I'm an owner like you and DIY'er. Is your machine one of these model types a FAV6800AW or a FAV9800AW? Does ...

water inlet valve. If the tub fills with the water shut off, the problem is drainage. If you determine that the water inlet valve (also called a mixing valve or fill valve) here's some info. The valve

Question about Kenmore Washing Machines

3 Answers

valve is sticking, other than that it is lack of water supply. Regards Advisor Brion, 2 new washers,same problem doesn't sound good! I hope that the 3rd one will work perfectly for many years. In case

...water valve. This is a common problem and a very easy fix. You can order the part at sears.com via model number and also see a breakdown of the machine and how to put it in. Check the pressure switch ...

Question about Kenmore Washing Machines

1 Answer

...water inlet valve that is leaking by. It is a solenoid controlled valve where the fill hoses hook up to. They sometimes become gunked up with rust or sediment and the diaphragms may not seat properly ...

Question about Washing Machines

3 Answers

...water valve solinoid. I would really suggest to replace the valve as a whole it ensures that you have a new part.ok? Hope this helps if yo need any further dissassembly help let me know and i can ...

Question about Frigidaire Washing Machines

1 Answer

...water valve when i looked up the part itself to replace it showed both the hot water and cold water valve as one unit, however the hot water is fine,just the cold water filler is out of ...

Not finding what you are looking for?
Kenmore 2.1 cu. ft. Portable Top Load Washer Logo

149 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...