...lamp,cover` and I cannot do anything with the projector. When you open the lamp cover for replacement of lamp there is a switch in the projector is OFF If lamp cover not fix proper after replacement ...
Question about Sony Office Equipment & Supplies
...lamp cover light is blinking then projectoe gose off hi, There is two possibilty for this problem one is the lamp cover is not properly placed and the second one is the lamp has reached end of its ...
Question about Sharp Office Equipment & Supplies
...lamp incators and a flashing red power will not go green to fire lamps check to see if the filter cover is open and/or the lens cover is open. there are switches in both openings, so see if the ...
Question about Sony Office Equipment & Supplies
Lamp/Cover light is on. hi, check the lamp cover is it open or not. there is switch for sensing, is the lamp cover is open or not. may be it became faulty. also check the lamp is it burned or not . if
...lamp cover is not properly closed. Disconnect the mains power and carefully open the lamp cover, reseat the lamp and close the lamp cover taking care not to force it. A fault of this type would be ...
lamp cover open. High voltage is powering the lamp from an smps or ballast supply. If lamp is New, cover switch is good, then the lamp power supply could be faulty. Siliconchip. same problem here too.
lamp? The cover is really tight and I don't want to break it. What's the trick to it? There is a screw to open the cover. then see the two or three screws inside for lamp.unscrew the same and pull the
lamp cover for vpl aw15 sony bravia projector Lamp cover is located at bottom of projector, loosen its screw and take off lamp cover. Process is also written in user manual page-56 with exploded views
lamp/cover light blinking I got this unit from a friend for our church. It will not turn on, and the lamp/cover light is flashing. I tried the covers as in the troubleshooting guide, but no luck. Can ...
Question about Sony Office Equipment & Supplies
lamp/cover blink. Power on, it Sony VPL-CX61 lamp/cover blink. Power on, it works. After about 10-20 seconds, it does not work, and lamp/cover led blink. hi, your projectors lamp cover may be open. or
47 questions posted
Usually answered in minutes!
94 Questions
59 Questions
55 Questions
35 Questions
28 Questions