Question about Dell OptiPlex Computers & Internet
My computer is not starting after a power failure. you probably damaged the power supply. open up the tower and check if a light is on the motherboard. Using a lamp, test the wall socket where ...
Question about Dell OptiPlex Computers & Internet
Dell optiplex gx520 will not start, shows yellow light on matherboard with yellow blinking power light I have tested the power supply unite, cpu, memory and i know they are working. when i remove the ...
...up. will re installing windows xp work or what do i do? Due to your diagnosis, it sounds to me like Power Supply failure. Weak Voltage power rail. Not enough power to keep the Processor on. (In this ...
Question about Dell OptiPlex Computers & Internet
My Optiplex 960 flashes amber 3 light when powering on. Unit flashes amber 3 light and does not power up. This usually indicates Motherboard issue. Whats unusual is if I press the power supply test ...
the power button is flashing amber When you pull the power plug the power button still flashes for a minute or two A flashing amber light means a power supply problem usually caused by a bad power ...
Power light is solid amber. If the power light is amber and green or steady amber ? A device might be malfunctioning or incorrectly installed. Remove and then reinstall the memory modules. Remove and ...
cant power up yellow light blinking Hello. The most common reasons are the battery, power adapter/cord and power jack. If you move/wiggle the power adapter at the point where it connects to the laptop
Optiflex GX260 does not power up I have a Optiflex GX260 that does not want to power up. If I plug the power into the PSU, the LED on the power button goes on and the off. There is also a yellow light
Question about Dell OptiPlex Computers & Internet
...Where ever you want. The cable numbering is really a Moot point. What counts is what type of Power Supply, power cable it is; and where it plugs into. ...
Question about Dell OptiPlex Computers & Internet
My Optiplex 360 receives power on board but cant power up My board gets power every time i insert in a power code but the machine can't power up. Tested my power supply and its fine,RAM is ok,
916 questions posted
Usually answered in minutes!
511 Questions
428 Questions
382 Questions
349 Questions
179 Questions