Compaq Deskpro EN PC Desktop "board video" Questions

...board video that has gone bad, and not the motherboard. When you install a video card on a PC, that has on board or integrated video, you will need to access the BIOS screen on start up and disable ...

...board video red is out Does it make sence to put a new video board in this machine e0machines T6420 bad on board video red is out Does it make sence to put a new video board in this machine If you ...

...board video I have a sony unit with an ASUS P4 motherboard. I added an AGP Video card but upon cold boot, the on board video port is used. How do I turn off on board video? is it in Bios? or a jumper ...

video is "ON board" which means it is built onto the main board and can not be replaced with out a new mother or main board. If you have an PCI slot or PCIE you can add another video card and use that

...board. No video from onboard video or PCI express slot. Checked hard drive in another machine it's fine. you can consider 4 factor on no video,it maybe video card or memory card,processor last mother ...

...board video and you have a black screen, the only thing you can check is the monitor itself by swapping the monitor out with one you know works. If you do this and still have a black screen, then the ...

board) 3-4-2 Search for video ROM failed Faulty video subsystem (defective system board) 4-2-1 No timer tick Defective system board 4-2-2 Shutdown failure Defective system board 4-2-3 Gate A20 failure

...video board or video section of the motherboard. If you have a add-in video board, remove the video cable and connect it directly to the video monitor jack on the motherboard to eliminate the video ...

...board video then it may be the drivers or the mother board. Check the main board for blown caps. The tops of the caps have an X cut into them. If this bubbles up then the cap is no good and the board ...

...board video not the add on card  and connecting the monitor to the correct VGA port for your on board video. Allow windows to load fully and configure the on board video then once this is ...