Philips 50PFP5332 50" 1366 x 768 Plasma HDTV, HDMI, USB, ATSC "led light won 39 turn" Questions

LED light is not on either Dynex DX-24L150A11 won't turn on LED light is not on either Sounds like you are missing your 5VDC standby voltage from the power supply. You either have a blown fuse

light blinks 3 time I have the same problem, called sony up but they are not responding back. The tv is still under warranty and brought it from Amazon. My situation is same but my led error code is 4

a yellow light flashing all the time. I tried to unplugged it, but didn't change nothing. The LED still flashing. check some leak or bulged capacitors at the power supply board then replace it

...LED. I replaced the main P/S and issue remains the same. Sony won't even help. Bus clock and/or data lines low at power on. 6 blinks of standby light denotes this. Actually, it should be a ...

...is the status of the LED at the front panel, does it has a steady, blinking light, if blinking, please count how many times it will flash. Some of the blinking LED denoting an error ...

...LED at it front panel lights up?  If lights up, and the TV won't turn ON, the fault is with its internal circuit board.  If not, the fault is with its power regulator board. This is the ...

...led light flashes twice Our Sony TV sometimes won't come on when the switch on the tv is pressed.  Weirdly, if we switch it off at the wall socket, wait a few seconds, then switch it on at ...

...led light is an error detected by the unit upon self check. You can isolate where the fault came from if you have a multimeter to check the test point. I can assist you to fix it yourself, click it ...

...led tv won't turn on. Even the power button on the tv doesn't turn it on. The red light that is usually on is on... Someone must open it and check voltages on the power supply board as the ...

...light. The green led stays on now but still no picture or sound. The green light inside blinks 3 times meaning vscan. As I unplug the board to the left (y did board?) The blinking stops and seems ...