...heat programmable honeywell, model RTH230B. YU=ou will have to type your answer as my voice on computer isn't working. go to www.honeywell.com. There you will find a search tab. Type in the exact ...
...RTH230B model thermostat. The heat works fine, but the AC is blowing warm air. Wires from old system are as follows: Y=yellow; G=green; R=red; O=brown; C=blue; E=white (it looked like the white wire ...
...heat I have Honeywell RTH230B programmable thermostats installed. They have been working fine for months. Now, they occasionally fail to turn off the furnace - and the house heats up indefinitely. ...
rth230b blows cold air when set on heat If this is a gas fired furnace, their could be a manual limit needing to be reset...if you reset it, & it happens again, you need to call someone to check ...
rth230b blowing cold air when on heat Check the limits on the furnace.
...heat thermostat It is a Honeywell RTH230B any Idea where I can get the directions Honeywell has the instructions for the thermostat here: ...
...blue and green and i just bought the rth230b where do i put them at exactly Red: Power (24 Vac) Green: Fan White: Heat Blue: Common Now I would check those at the furnace BEFORE you hook the wires
RTH230B Do you have a heat pump? If so, not compatible. What i did was move the jumper on the thermostat (RH RE). This is on the inside of the thermostat - NOT the red jumper!!! and got the AC working
...RTH230B thermostat and it uses 5 wires Rh Rc W Y G and the current thermostat is a LUXPRO electric heat and cool with 6 wires C(Blue) G(Black) R(red) W2(White) O(orange) B(not used) Y(brown) E(jumped ...
RTH230B. The wire colors are: White, Green, Blue, and Red. There is no Yellow wire. I put the blue wire in the Y spot and the AC seems to come on, but for some reason it won't go below 75 degrees.
2,089 questions posted
Usually answered in minutes!
87 Questions
47 Questions
43 Questions
32 Questions
17 Questions