...1-Line Pick up the telephone receiver and listen for a dial tone. Make sure that you can dial out using the telephone keypad. If there is a dial tone and you can dial out using the telephone, the HP ...
Question about HP LaserJet Office Equipment & Supplies
...faxing information to another fax. I enter the number that the fax is going to, the fax dials the number, the pages are put into memory ( it says) then when it is time for the fax to go through, it ...
Question about HP LaserJet Office Equipment & Supplies
...1. From the Home screen, touch Administration. 2. Touch Information. 3. Touch Fax Reports. 4. Touch one of the following buttons to print the corresponding report: ● Fax Activity Log ...
...1. Use the alphanumeric buttons on the all-in-one control panel to dial the number. If the fax number you are calling has been assigned to a one-touch key, press that key. -or- If the fax number you ...
...1. Load your document into the ADF (automatic document feeder) 2. Dial the fax number of your first recipient 3. Press the button with the check mark on it (DO NOT PRESS SEND AT THIS POINT) 4. Dial ...
Question about HP LaserJet Office Equipment & Supplies
dial and gives tone but while in comming call no rings no reply ring answer mode is 1 but quite I checked every way settings wires but cant understand can any one know about this and help me. My email
...1.Check telephone line.2.Make sure telephone line is connected in line in port not in extension.3.connect extension telephone phone to the device & check for the dial tone. Dial the number and ...
Question about HP LaserJet Office Equipment & Supplies
...dial tone, contact your telephone company and have them check the line. ? Make sure you have correctly connected the HP All-in-One to the telephone wall jack. Using the phone cord supplied in the box ...
Question about HP LaserJet Office Equipment & Supplies
...1. Assign a speed-dial entry to each fax number that you want in the group 2. On the device control panel, press MENU 3. Use the < or the > button to select Fax setup, and then press ENTER 4. ...
Question about HP LaserJet Office Equipment & Supplies
...dial entry, and then press menu/enter. Note When dialing by using the alphanumeric buttons, include any pauses or additional numbers that are necessary for the call, such as an area code, an access ...
761 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
492 Questions