light. I unplugged it and it goes right back to it. You probably have a "door" sensor indicating it's open.. The doors to check are: - cartridge bay door - rear duplexer or back panel (is it in place?
...light comes o. When I try to print. connect the printer directly to wall outlet then disconnect the power chord from the back of the printer press the on button on the printer for 10 times reconnect ...
...went on go under ur hood and disconnect the battery, let it stand for 30 minutes and reconnect (this will reset the check light), if it comes back on than u should get it checked out by a ...
...light up. no displays or anything in the display...please help....could it be wrong power cord? Try unplugging power cord and phone line at back of unit. Let set for 2 minutes to recycle then plug ...
Question about HP OfficeJet Office Equipment & Supplies
back of printer I canceled the print job, but green light continues to flash and I can't get it to reset Sounds like info is "stuck" in the buffer. To clear it out, turn the printer off,
Question about HP OfficeJet Office Equipment & Supplies
...back to the printer. now let the buttons go when the on light starts flashing The print button will not turn on. Nothing will print. The hp screen in the middle lights up and it blinks but nothing ...
...back on to fix the flashing light problem, so that the printer would work. Now when we turn it off, it turns itself back on and the lights continue to flash rapidly. It now takes 20-30 times turning ...
...off. then unplug your system from your wall outlet...wait 15-30 seconds...plug it back in and then turn on your system..this may work out wise I need to know what light is flashing on your
...back on the lights are blinking and it wont reset. Hi Lets try all factory resets, that will resolve this issue. PARTIAL RESET:- Unplug the printer power cable while its ON, press and hold # and 3 ...
...light. Have a look. Regards Andre Please come back and rate the answer. Hi You may take out the catridges and clean it with a clean piece of cloth Also take out the print heads and clean the copper ...
3,272 questions posted
Usually answered in minutes!
1,584 Questions
1,223 Questions
991 Questions
857 Questions
782 Questions