Acer AL1916W 19" LCD Monitor "computer signal works day" Questions

...signal but my computer screen work just the other day, this problem come about when I disconnected my monitor to view on another PC. And now I rec onnect it to my computer and I don't get any

signal, but the cable is good, it works with my other monitor. Chane the Capacitor on panel circuit The problem is in the power supply and inverter board, caused by bad capacitors that sometimes bulge

computer or the signal it is receiving is beyond its capability. Just to verify that it is indeed the PC;'s setting that is the root of the problem and not an internal fault within the monitor, pls: 1

Acer AL1714 My monitor flashes the acer logo for less than a second and then goes black, after 10 seconds or so it goes into sleep mode. If I have a video signal going into it, it does not go into ...

...signal). if i turn the monitor power button off and back on the monitor works for 30 sec to 1 minute and repeats the shut off. I took this monitor apart and found 2 470uf 25v caps blown on the power ...

...signal comes on the sceen it goes to black and the light turns orange. The pc has a new video card installed and tests okay on other monitors, a new cable between pc and monitor has been installed ...

day i moveid it from my brothers room and i pluged it in and i pluged it into my laptop and it is on but it says no signal and it is pluged into both things.i made sure that it is pluged in and on but

...computer 2. monitor receives signal, it looks like its working 3. it goes through some steps and then the monitor says "no signal" and kind of stays in limbo with fans running, etc. Solution One ...

...signal will stay green. If I plug in and plug out the monitor several times, then it will start getting signals and works. Somedays it will take about 15 minutes for the monitor to get working. What ...

monitor problem sir, i have a monitor lg 45v in last few days it is not working when connected it to the power supply the screen display(rastor on). but, no video signal while connecting the signal ...