...the bottom cover, to assess drum damage.....! Help! no need to do that this problem is a suspension leg one located each side of the drum the leg has snapped and is reasonably easy job only two nuts ...
Question about Washing Machines
leg protectors. Needing to find the manufacturer information for the Hyper Tough workbench...I purchased two of them from WalMart and one of them did not include the plastic protective feet covers - 4
Speed Queen Top Loader heavy duty washer The washer seem to be going off balance in spin mode.This cause the machine to move and shake.What can the problem be? thanks Rick First unplug the machine, ...
... I just purchased my LG washer and dryer a couple of months ago. I keep thinking I need to turn the leg level to balance the drum but that has not seemed to fix the heavy vibration. Starting in ...
Question about Maytag Washing Machines
...On the bottom of the front panel there should a philip head screw right above each fron adjusting leg. Remove these 2 screws. Open the cover and lift up on the front between the drum & cover there ...
...board has 2 relays on it. They have white plastic covers. One is labeled K4 and K2. There are five legs on each relay soldering them to the circuit board. Remove the circuit board from the machine. ...
maytag washer out of balance First make sure on the machine that all adjustable legs under neath are touching the floor and it is level if all is good. THis could be a case that the weight that ...
when it gets to spin cycle it move all over the placy bang into wall ???? Check to see if the machine is level and all the 4 legs are making good contact with the floor. If the machine is level, check
Whirlpool ghw 925 washing machine Washing maching shakes when doing a load of laundry. I leveled out the legs and used a level, but still shakes alot. The drum mounts to a spindle on the back. On ...
52 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
