KitchenAid 32685 Mixer "pin stuck" Questions

...stuck on the shaft. It depends on what is sticking to what you should use. If it is some sort of food, then soaking it for a while (20-30 mins) with fantastic would loosen it. If its seems to be dry ...

...pin/shaft and is stuck.I'm a hobart tech and if i came to your place,first i would use a rubber mallet and hit the outer edge of the hook upwards and see if i could free it.If that does'nt work i ...

pin stuck? If the pin is not sticking out all of the way, or the spring is bad/damanged it is possible the beater could come loose. You would want to replace the agitator shaft. Agitator Shaft: http:/

...stuck. I don't know what to do and I need to do a cake as soon as possible. Thanks for your help. This has happened to me - however, the attachment pushed up and down on the spring with no trouble, ...

...stuck in the release pin. usually wrapping it in a hot steamy towel for a while works. but what you might try is also wrapping it in a hot steamy towel for a frew min about 15-20 then taking a screw ...

cannot get dough hook out of slot pin seems stuck run under hot water over where the dough hook attatches to shaft. this should free it.

...my Kitchen Aid Stand mixer and the pin that holds the planetary in place is completely stuck. Any tips for how to get it out so I can remove the top? You simply use a punch and hammer and tap it

...If you found this solution helpfull, please rate it. Good luck. ricardok45 they do get stuck. sometimes the pin shears and it gets run with it sheared and gulls the shaft and planetary housing up

...stuck and I cannot remove it from machine. Got pin out ok. kitchenaid KSM5 Remove the chrome drip ring by knocking it downwards with a flat screwdriver and a hammer.....carefully. Then you can get a ...

...pin (7/64 dia x 9/16 long), stuck in the grease near where the teeth were missing. I have another fiber gear from a second parts mixer but I cannot find where the pin went. I'm assuming this pin got ...