thrust bearing needs replaced. The thrust bearing is what releases the brakes. You will not be able to rotate the basket manually with the brakes set. I recommend replacing the thrust bearing kit part
thrust bearing. Remove the belt and rotate the drum pulley CCW. The pulley should push the thrust bearing upwards, releasing the brake, and engage the transmission. If it doesn't you have a bad thrust
Question about Maytag Washing Machines
...thrust bearing, can it be anything else? could be rattle noise maybe grinding (not sure) Washer does operate, wash, and drain...noise is constant except when filling Hi, I would agree with that ...
thrust bearing pulley turns freely. When in the spin cycle the thrust bearing compresses the brake directly above it. If this brake is hanging up even a little the machine cannot reach full speed. The
replace thrust bearing maytag PAV2300 Hi,This link is a picture of the thrust bearing and it's order of how it needs to be replaced. Item number you are looking for is 24. I hope this helps
Question about Washing Machines
...to have a bad thrust bearing would the washer still agitate with a bad thrust bearing. Thank u for your time. you may have a bad lid switch.. if so the washer will fill with water then do
Question about Washing Machines
...need to replace the thrust bearing. The Instructions are included and there is a video on that same page to show you how to make the repair. Whirlpool 12002213 Thrust Bearing Kit AppliancePartsPros ...
...on a top load maytag machine? thanks no this machine has a thrust bearing not a clutch if the machine is not spinning well you need to replace the thrust bearing kit it come with a new drive ...
...thrust bearing and pulley kit, but that did not help. With the thin 0.032" thrust washer, the pulley barely moves counterclockwise (maybe 1/8") before the shaft rotates -- the cam alignment ...
855 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
658 Questions
476 Questions