Maytag MAH6500 Neptune Front Loading Washer w/Built in Water Heater "wont spin model" Questions

wont spin with clothes in it. Take the clothes out and it spins fine. I couldn't make out the code, I tried moving the clothes around and it still wouldn't spin. I removed the clothes and it completed

Wont spin with clothes Our Maytag Neptune tl fav 6800 will spin without clothes but it wont spin with clothes we get a uc code and a dc code Common problem with this model I own it. Sounds like the ...

...to find a technician to come and look at it. Can I fix this myself. if its not draining then it wont spin/ locate the pump and filter if this has one cleaning should cure basic diy skills will ...

...wont engage in the spin cycle so it isn't an expensive part to replace that could be worth checking. A volt meter would quickly tell you if it was working or not it is just a basic switch the other ...

wont spin to dry Yea I agree this Forum is not a true DIY forum or it would ask for Model Number and Serial number. What error codes if any all very important info. If your machine model it a FAV6800A

wont work, Could the error code displayed be UC for a unballance detected during the start of a spin cycle? If you remove the wash load and place the washer in a Spin Only cycle it should complete the

Maytag Neptune Washer, Model: MAH5500 The door does'nt lock and it does't spin. The problem is with your door lock set.You may need to replace it.If your lock is faulty the washer wont begin its cycle

wont drain and finish a cycle The washing machine will not drain or finish a cycle it tries to run but stops after a few second Is the wash tub banging aroun in Spin Cycle and failing with a unbalance

wont go into final spin the washer works fine untill it gets to the final spin when there are 7 minutes showing on the digital display it goes to 0 and the door lock light goes out. so it passes up ...

...BE WRONG MY WASHER WON'T SPIN, WHAT COULD BE WRONG this model has a problem with the lock open your front panel and check r-11 on your control board if this is burnt it wont lock and then wont ...