Question about Maytag Washing Machines
...tub start to spin fast (with no cloths in tub) at first, then it slows down and eventually stops. If I reach my hand in the tub and help it to spin, it will start spinning, then stop again (the tub ...
...tub spin freely by hand? If the tub does NOT spin by hand, the rear tub bearings may have seized up or something could be bound around the spin basket shaft (I've seen this one before). Let's hope ...
Question about Kenmore Washing Machines
...tub.or spin bearing has failed and ruined tub support shaft,ok new tub.but why else would you need a new tub for a no spin problem,not sure,and to answer your other question , can you fix the tub if ...
Question about LG Washing Machines
...tub not spin during a washing cycle while the tub is at full capacity? LG wf t7014pp top loader. The inner tub has stopped spinning during the washing cycle. The pulsator still works during the was ...
Question about Whirlpool Washing Machines
...hi there, seems to be an issue in the gear case or(transmission box). i may be defective. Here is the part number. 3360630 i would replace this. it will start to spin the tub after this
...with water. However, if I lift the lid and spin the tub into a fixed position, it spins fine. Sounds like the machine is not pausing between cycles to allow the transmission to lock into spin. ...
Question about Hotpoint Washing Machines
...spin the tub bearing might have seized. This is a common problem and relatively easy to replace. Tub Seal and Bearing Kit If the washer won't spin the tub seal and bearing might have seized. This ...
Question about Kenmore Washing Machines
tub will not spin during spin cycle, burnt smell on a small load the tub will not spin during the spin cycle, clothes are still soapy, and there is a burnt smell Sounds like the belt between the motor
Question about LG Washing Machines
...tub not spin when the tub is full? The inner tub has stopped spinning. The pulsator still works during the was cycle but the inner drum does not spin, this is while the tub is full. If the tub is ...
Tub will not spin. The agitator works, water drains from the tub, and everything seems to be making connections and operating the way it should. The motor runs, pulley spins, etc., but the tub will ...
72 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions