...agitator. Remove the barrier cap by pulling it up. Use a socket wrench with extension or nut driver to remove the stud and seal holding the agitator to the shaft. Remove the agitator mover by pulling ...
...remove the agitator and place it on the floor,put a foot on both sides of the bottom of the agitator,next you nead to grab the top of the agitator and pull up and remove the top of the agitator.place ...
...remove agitator to inspect and or replace dogs due to weak agitating action. if i could take the agitator off my girl friend and put it on the machine, the clothes would get real clean. or real ...
Question about Washing Machines
...remove the agitator from my Kelvinator K605 washin I have removed what appears to be the retaining bolt but the agitator remains fixed in place Please help Agitated Before removing the agitator, ...
Question about GE Washing Machines
...remove agitator from GE washer? Model WHDRR418G1WW. GE washer will not agitate. Drains OK. How do I remove the agitator to see if it is still connected to clutch/motor? Thanks...Dave how to remove ...
Question about Roper Washing Machines
...down into the water to be washed. remove agitator cap remove boplastic cover underneath remove bolt remove upper portion of agitator replace agitator dogs part # 80040 rtw44oxqo is 285748 ...
...dogs. First, How do I get to the bolt to loosen it and lift out of machine, please? Thanks, remove top of agitator remove plastic cap inside agitator housing. remove 7/16 in. bolt. lift out ...
...remove the agitator. Remove the softener dispenser from the top of the agitator and when you look down the agitator, you will see a 10mm stainless steel bolt. You will need to remove this bolt to ...
Question about Whirlpool Washing Machines
...remove agitator cam from the upper part of the agitator? How do I remove the agitator cam from the upper part of agitator to replace the dog-agits? Can't separate lower from upper agitator once ...
Question about Whirlpool Washing Machines
remove the agitator cap, insert a small flat-head screw driver into the seam between the agitator cap and the upper agitator (mover). Use a twisting or prying action to pop the cap off of the agitator
317 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
