...open the door. Remove the door gasket retaining hoop by stretching apart the retaining spring at the bottom of the door opening. Gently peel the part of the door gasket near the door lock/latch ...
...locked with the door open , how do i get it to unlock ? There is a manual unlocking tab located at the bottom of the door lock and switch assembly. Disconnect power to the washer before accessing it. ...
Question about Maytag Washing Machines
...Open the machine's door. Locate the retainer spring of the seal boot retaining hoop at the bottom of the door opening. Stretch the retainer spring apart then remove the retaining hoop. Ease the edge ...
...locked. Can not open it at all. Can then set the parameters for a wash, but when press start, it doesn't! So have dirty clothes in a locked washing machine and no way to get them out or clean them!! ...
...locked shut, finally got door open after taking washer apart. I don't know what to do next. Does the door lock latch have anything to do with it not working and that buzz sound? it might be the ...
locked after 6 trials then the Central Control Unit (CCU) will enters a failure mode and the digital display flashes FdL. This is a door lock failure and the only viable solution is the replacement of
...open the door. Remove the door gasket retaining hoop by stretching apart the retaining spring at the bottom of the door opening. Gently peel the part of the door gasket near the door lock/latch ...
open the door. Remove the door gasket retaining hoop by stretching apart the retaining spring at the bottom of the door opening. Using needle nose pliers, start where the spring and wire are connected
...locked and won't return to the open position? What is the remedy for this problem, does anyone know? Remove the screws attaching the bottom flange of the lower front panel to the machine cabinet ...
359 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions