...spin cycle unloaded, it completes the cycle fine. If there's a loud thumping noise during the spin cycle, the load of clothes has probably gotten unbalanced. Open the lid, redistribute the clothes in ...
...spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if
...spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary ...
Question about Maytag Neptune Washing Machines
...spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary. ...
spin cycle happens when the bearings have gone out on the tub. Same problem I had. Replaced the bearings myself after ordering the parts and haven't had the noise since. It's back to working perfectly
Question about Maytag Neptune Washing Machines
...Spin Only cycle with no clothes in the wash basket. Can you let me know if that cycle runs with no noise? We can?t totally rule out an issue with the clutch/transmission components with the info ...
...spin (suspension problems are also often worse at this stage too). It's not normally a metallic sound though. If the noise is coming from the motor banging against the sides of the machine then it ...
...spin cycle he heard the washer thumping like the clothes needed to be repositioned. He noticed that the washer had an E3 code and opened the door to the washer. When he did, a large round band/spring ...
Question about Speed Washing Machines
...spin cycle starts there is a loud consistent thump,thump,thump during the spin. It starts immediately even before the tub gets up to speed and the thumping does not increase with speed so don't think ...
Question about Whirlpool Washing Machines
spin cycle My top loading Whirlpool washing machine makes a loud thumping sound at the end of the first spin cycle as it is winding down just before refilling for the rinse cycle. It doesn't do it any
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions
