Maytag Neptune FAV6800AW Top Load Washer "replacing water inlet" Questions

Water Inlet Valve or a defective Pressure Switch. Because this board doesn?t ask for the Model Number or Serial Number we need to start there. Here is where the Model and Serial number info is located

...Water Inlet valves is not closing completely ad end of the completed wash cycle selection. You go to remove the completed wash load and water continues to flow is that correct? 1. If you pull the ...

...water-inlet valve? (The water-inlet valve is the device on the washing machine that the fill hoses are attached to.) If you can't hear anything, the water-inlet valve may not be getting any power. If ...

water inlet valve. The part number for the inlet valve is 12002242. There is a Substitution P/N 25001046 you will see that here its item 21 at Sears Parts Direct. If you DIY you may want to consider a

water inlet valves from the console and make sure the correct water inlet valve opens and fills the machine...........Rich and a p/n if you need to replace the water inlet valve assembly. the valve on

...water inlet valve is stuck open. You will need to replace the water inlet valve. The Service manual will step you thru the process. FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct ...

...water inlet valve. It appears that the hot water solenoid has either become clogged, or had failed. You can find a replacement at repairclinic.com. Type in your COMPLETE model number in the Search ...

...water inlet hoses at the back of the washer and inspect the water inlet screens for sediment blockage. The washer inlet screens look like this; If the above items check OK reconnect washer supply ...

...inlet water valve. Either the diaphragm is stuck or... one of the water valve solenoids have failed. The solenoids and water valve assemblies are NOT repairable. IF they fail the only remedy is ...