Maytag Neptune FAV6800AW Top Load Washer "remove pawl" Questions

...and oil and reset. The machine can be tilted after removing the power and this mechanism could be removed and reset. You will need to bypass the door switch and the water level control to simulate ...

...remove the main drive gear and look for a smashed down spin pawl.Under that main drive gear is 3 spin bosses. over time the spin pawl takes a beating catching the boss as the neutral pack pauses from ...

...remove the water before the tub has to turn. When the pumping is timed out the power is killed momentarily and the spin pawl gets released. When power is resumed the spin pawl catches one of 3 bosses ...

...the agitator do what it does. They are located in side the agitator. You will see them when you remove the agitator.GOOD LUCK

Remove the clutch and transmission cover. Inspect the main drive gear and the spin pawl beneath it.The main drive gear show in this 30 sec video is plastic (click on the link). The new gear comes with

...capacitor failing that a broken cluth pawl Most likely a transmission problem. It's trying to spin and agitate at the same time. Ratchet with long extension and probably 7/16 socket will remove

HOW DO I SEPERATE THE TOP PART OF AGITATOR FROM THE BOTTOM PART Remove top cap and inside of agitator you will find 7/16 bolt i believe..maybe 3/8 either way,..remove bolt and pull agitator up and out

...pawl hook is worn or the agitator gear is rounded off. the transmission must be opened up to see what is a miss sounds like you have some bad adgetator dogsthey are plastic and they sit inside the ...

...cover off I found that there is no belts. I'd like to fix this myself today, what should I do? Remove the softener cup Remove the cap underneath Remove the bolt Pull agitator apart Look for ...

pawl will get all smashed down and fail with age. Remove the main drive gear and do a looksee. Also their is a spin cam actuator inside the base of the main drive shaft inside the tranny. Very seldome