Question about Maytag Neptune Washing Machines
...machine starts the wash cycle. check for a faulty solenoid under the drum that activates the reverse pawl get a technician to inspect and repair. Possible that the drum release lock is not working or ...
Question about Maytag Neptune Washing Machines
...machine stops at the same place in the cycle as the old control board. just a guess lol but when you replaced the control board to you/him replace the wax motor lock ' check the control look for the ...
Question about Maytag Neptune Washing Machines
...the drum. Even when the machine is unplugged the lid remains locked. There is a service manual behind the control panel it will show you how to test the door locks. If might have a bad lock
...lock light lights, the machine shouldn't stop. If only the initial light comes on, the door isn't locking. As a result, as the drum moves the clothes and they push against the unlocked door, it turns ...
Question about Maytag Neptune Washing Machines
...cause the main control board to go bad. the lock motor sits above the washer door behind the panel. the control board sits inside the dryer above the drum to the right. go here to look up your ...
...Lock light does not come on during the washing cycle. i have checked the pump and there are no obstructions. Hi, Problems with a washing machine not spinning or not draining are often inter related.. ...
...machine was noisy before this showed up so I think the drum bearings are out. I would like to know how to change the bearings in the drum. Any info would be helpful, Thanks Luie you have a locked ...
Question about Maytag Neptune Washing Machines
...could be a belt but in that case you would still hear the motor running if not then the gear box is locked and will need to be ...
...Washing Machine (MLE200AWW) spins but water is not pumped all the way out. I can hear it slosh in the drum if I spin the drum manually. Hi, the sloshing sound is normal because of the balance ring ...
...on) all the way and the drum pushes the door open even more. It seems as if the lock in NOT working properly. Try replacing the door seal. If that doesn't solve it then also replace the door
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions