Question about Maytag Neptune Washing Machines
...stops when is ready to spin it starts the cycle but when it is ready to spin the digital number display wont move from 9 to 8 while is doing this the water punp keeps working on and off My mah6700aww ...
Question about Maytag Neptune Washing Machines
...with an cycle option or the rinse only cycle and press the rinse button and time on display should decrease to about 9-12 minutes. Now, if you can't get it to start, you've got an issue with
Question about Maytag Neptune Washing Machines
stops running and displays LL any ideas what this could be? I have already checked the clutch and bearing regreased all working good. Sorry chukenne, Having not experienced this issue on my FAV6800AWW
Question about Maytag Neptune Washing Machines
...9 minute mark, and get down to the 7 minutes then drop directly to 0 with no spin at all. After hours of investigation it turned out the balance load switch was corroded. This switch is accessible ...
...stops at the point where I have 35 minutes left in the cycle with the code nd. There is nothing in the drain tube that comes out of the washer. Do I need to check any other place? An empty load ...
...9. Display a ?PA? (Passed) on continuously for 10 seconds if no diagnostic codes were logged during this test. The up arrow if pressed will advance to the next step. The right most dot will be turned ...
...stops with 9 min. left ,,,[email protected] The LR error on your non-spinning Maytag Neptune is usually, though not always, accompanied either by a burn spot or a blown fuse on the Motor ...
Question about Maytag Neptune Washing Machines
...9-10 yrs old. Is this something that can be fixed or do I need to look for a new washer? The LR error on your non-spinning Maytag Neptune is usually, though not always, accompanied either by a burn ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions
