Question about Maytag Dryers
How to tell if the heater relay is bad in my model MDE5500AYW dryer Won't it heat? If not, It's either the fuse, heating element, thermal cut-off or thermostat
...MDE5500AYW that will not heat up. When I opened the front and looked at the heating element, I noticed that the wire attached to the heating element (a black wire) was no longer attached. A closer ...
no heat when dryer run Hi, If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not ...
Dryer has low heat, not enough to start the timer, tub turns and heat may be 95-100 deg. only and takes forever to dry Hi, If you are having problems with your gas dryer not heating the most common ...
watt for dryer what is the watts for a neptune dryer (elec) model mde5500ayw Total 5500 watts for motor timer and heating element on an electric model. (estimated)
THE DRYER SPINES BUT DOES NOT HEAT Most of the time this happens when a safety limit has failed. You will need to test them with an OHM meter to determine which one it is.
spinning not heating First check the lint trap top & bottom of dryer could be plugged, if not heater coil is out.
Question about Maytag Dryers
how do i access the motor and heating devices on my maytag electric dryer SATURN MDE5500AYW you remove the front panel - on some units you have two screws towards the bottom of the panel - remove them
MDE5500AYW. HAVE THE DOOR AND FRONT PANEL OFF ALL ELEMENTS LOOK CLEAN AND ATTATCHED. No problem with home power supply Thank You Hi, If you are having problems with your gas dryer not heating the most
2,008 questions posted
Usually answered in minutes!
867 Questions
815 Questions
489 Questions
196 Questions
146 Questions
