Maytag Neptune MDE5500AY Electric Dryer "88" Questions

electrolux dryer EIED55HIWO It is flashing 88:88 on the panel Hello - Typically 88:88 on an Electrolux dryer indicates a generic power failure code. Try resetting the unit by unplugging it or flipping

i have maytag neptune 5500- shows error code 88 When the 88 displays, put a heating pad over the display - it will be ready in just a few minutes. Sounds crazy, but it works every time. I think 88 is ...

Display flashes 88:88 and won't start http://www.retrevo.com/support/Electrolux-EIGD55H-Dryers-manual/id/23220bh550/t/2/ Error codes explained in manual above. http://www.repairclinic.com/Dryer-Repair

The LCD display screen is blinking 88:88 and all the buttons are blinking blue You might have to reset the machine. Unplug the machine for 30 seconds and plug it back in

when power came back on, getting 88 on digital display but won't reset 88 is diagnostic mode. just press cancel or push power again. that will reset it back to normal use.

I have a electrolux dryer that displays 88..88 on the LCD and none of the buttons are responding to inputs. Any ideas on how to reset the problem. I have the same dryer....u have to unplug it for 30 ...

dryer lights are flashing from one side to the other, no code is flashing, the time screen shows 88:88 with a bar below it sounds like a faulty circuitry board has malfuctioned. sorry it might be dead

I'm getting a code 88 when turning on and it shuts down I'm getting a code 88 when turning on See Page 65

Ge Profile dryer DPSE810GG8wt gets error code 88 after replacing we04m10003 88 is for the main control board failure. The board you replaced, was it a new board or a used board?

...neptune dryer to our new cottage and it needed a new hookup. It worked for a while-but now it reads 88 and won't work. Is it the dryer or the electrical? We moved our neptune dryer to our new cottage ...